How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct procedure to add an additional key. This requires a handheld computer, called Tech-2 that is operated by the dealer. A new key and transponder are required to be purchased and programmed to the car.
It is a good idea to rotate your keys so that one doesn't get damaged faster than the other. This will also help keep your keys in pristine condition.
Replacement Case
The new key fobs aren't like the older Saab keys. They are equipped with electronics which make it hard to duplicate. This has made theft of cars much more difficult than it was twenty years ago. But, it has also made replacing lost keys a more expensive endeavor.
Saab 9-3 owners must have two keys that work. It costs a fortune to replace a lost key, as it requires replacing the CIM module, as well as changing the locking cylinders. Dealers charge between $100-$200 for this.
There are options to avoid the high cost. Some parts suppliers can look up the code on a spare key (usually the same one that opens the doors and turns on the ignition) and cut a new metal key blade at a fraction of the dealer's cost. The key, however, must be identical to the original one to function properly in your vehicle.
Follow these steps to replace the case. You'll need a flathead screwdriver as well as some patience. With the screwdriver slowly pry the plastic apart and remove the emergency key from the case. Once you have the case open, remove the electronics and place them into the new case. Insert the correct key and badge into the case.
saab key replacement cost for the Saab 9-3 is an inexpensive component that can be replaced easily and quickly. This YouTube video by Cyclone Cyd demonstrates how to replace the remote fob battery in just four simple steps. This tutorial will work with any modern Saab key fob. However, the process may differ slightly.
The first step is to find the button that lets off the backup key within the fob. This button is usually located just below the Saab logo on the back of the fob. Then use an screwdriver with a flat head to insert into the tiny hole in this button. This should be sufficient to open the fob case so that you can change the battery.
Once you have installed the new batteries CR1632, it is possible to restore your remote key fob. Then, you can program it into your car. The whole process should take more than an hour at most. It's a simple procedure that doesn't require any special tools.
The process is a bit more complex if you lose your key, but still possible. The dealer must find the VIN number of the car and then request a replacement key blade and TWICE module that has the correct unique code. The dealer will then have to program the key using MDI an innovative software tool.
Replacement Key Fob
The key fob contains batteries that are used to lock and unlock your vehicle. They have a limited life span and will eventually fail. This is a frequent issue with all cars. The good news is that you can replace the battery on most key fobs without having to replace the entire case. Amazon sells replacement fobs that have all the electronics in place. You can simply remove the case and replace the batteries. It is important to keep in mind that you'll need to remove the emergency key first. you can accomplish this by inserting the screwdriver of a small flathead into the slot that is located in the middle of the case. The screwdriver should be moved around the case, and it will split open, making it easy to remove.
If you're ready to replace your keys, make sure you have a spare available. This will save you a lot of money. If you have a spare you can have the dealer cut a new key and program it into your car, which is cheaper than replacing the entire key fob.
If you do not have a spare key you can add another key to your car, however this requires a lot of research and effort. It costs around a hundred dollars to purchase an additional car key. The computer of the vehicle also has to be programmed. This can be accomplished by a professional, but it's a costly choice for the majority of owners.
Replacement Ignition
Contrary to earlier Saab cars, the modern SAAB 9-3 models feature an extremely sophisticated alarm system that is based on a coded key. This means that when you lose your sole working key, adding another one can be very expensive since the car has to have a unique computer module installed and it also needs to be specifically designed to accept a different key. Most locksmiths can't do this and a dealer will charge several hundred dollars to program the new key!
If you've lost the only working key, a dealer will repair the computer in your car (known as the CIM or SAAB TWICE) to create a replacement, and they will charge you a premium price for it. Instead we can reprogram the EEPROM on your existing car computer, preparing it to accept a second key, slashing over 50% of what you'd spend at a dealer.
If you've been a long time owner of a 03-11 SAAB 9-3, then you likely are aware that the ignition key isn't all that durable. If your ignition key isn't functioning properly, it is time to look into replacing it. They can become sticky and the buttons can fall off. It's not so difficult as it may seem to replace the ignition key. With the right tools, it is able to be accomplished in a matter of minutes.